Product technical parameter:
TCS311A-H is a carbon monoxide detector with EN50291 BSI certificate. BSI is top notify body in Europe, who usually write about the EN regulations. With BSI certified, means this carbon monoxide detector is the top quality in the Europe.
Product Features:
Power supply: Built-in lithium battery, 10 years battery life time
Imported Figaro sensor
Sensor type: Electrochemical
Alarm volume: ≥85dB at 3m
Silence function: Approx. 10 mins
Product life time≥ 10 years
Size: Φ110*68 *33mm
Recommended Installation Locations:
Co Gas Leakage Carbon Monoxide Detector
1. Keep out of damp and humid areas such as the bathroom. Avoid spraying aerosols near the alarm.
2. Do not install in areas where the temperature is below 0℃ or higher than 40℃
3. Do not place behind curtains or furniture. Carbon monoxide must be able to reach the sensor for the unit to accurately detect carbon monoxide.
ALARM CONDITIONS:
CONCENTRATION | DETECTION |
50ppm | 60-90 minutes |
100ppm | 10-40 minutes |
300ppm | Less than 3 minutes |
At this time, the red LED will flash once per second with pulsating alarm until test button is released.
Our factory:
Our Certificates:
FAQ
Q: How many containers loaded in your factory every months?
A: Averagely, we are loading one or two containers every day.
Q: How long do you take action for clients' complaints?
A: We will take action immediately when receive the complaints and provide the 8D report within the same day.
Q: What kind of Third party factory inspection do you pass?
A: We have got the BSI, CNPP, Activfire, SAI certificate, the test body will be do factory audit once every year. Such test body can be recognized as the most serious third party factory inspection.
Hot Tags: Co Detector In Garage, China, manufacturers, suppliers, factory, CE Carbon Monoxide Alarm, Figaro Sensor Carbon Monoxide Alarm, co alarm
