Product Details:
JBE heat sensor is designed to detect rate of increase in temperature. This alarm allows you to interconnect up-to 40 smoke, heat or carbon monoxide Alarms to create a network of protection throughout your home.
Product Feature:
Sensor type: Photoelectric
Product life: About 10 years
Safety standard: EN 14604
Best operating ambient temperature: 0-40°C
Operating relative humidity: ≤ 93% (non-condensing)
Alarm noise level: ≥ 85 dB at 3 m (9.84 ft)
Rate-of-Rise Heat Detector
Rate-of-rise heat detectors sense the heat in the room. The detectors register 70 degrees as a baseline; when the heat in the room rises rapidly above 70 degrees, the alarm is activated. This type of sensor is triggered by the "rate of change" rather than the temperature itself. Usually, the alarm is triggered when the rate of change is a 15 degree increase in less than a minute. When a house fire starts, the temperature in the room will rise rapidly-in some cases, the temperature will rise 30 degrees in 45 seconds.
our company
Our factory
LORENZ Smoke Test Tunnel
Assembly Line
SMT Workshop
Dust-free Workshop
Certifications
Exhibitions
FAQ:
Q: Can I replace the battery?
A: Yes. The battery is replaceable.
Q: What is the sound level for this product?
A: 85 decibels alarm tone within 9.8 feets, even your neighbor can hear once detected.
Q: What accessories are included in each box?
A: 1pc of user manual, 1pc of label, 1 package of screws.
Q: Is it one use only?
A: Yes, you have to throw it away if it goes off.
Q: How does it stand?
A: Screw the mounting base onto the ceiling using the appropriate fasteners. Press the Test/Hush button to check that the heat alarm works.
Hot Tags: Heat Alarm For Attic, China, manufacturers, suppliers, factory, 240V Heat Detector
