Description

Send Inquiry

Installation of household smoke alarm:

1. Drill two installation holes with a diameter of 6mm at a distance of 60mm on the ceiling, and fix the bottom plate of the detector with plastic expansion tube and screws.

2. Turn the smoke alarm counterclockwise, remove the base, press the 9V stacked battery according to the polarity mark of the battery buckle, press the battery tightly, then press the battery buckle line and the battery into the battery compartment at the bottom of the detector. Note: if the battery is connected in the opposite direction, the detector will not work properly and may damage the detector.

3. Turn the detector clockwise on the base and fasten it in place. Press and hold the self-check button. If abnormal, check whether the battery is installed correctly or the voltage is too low (low 7.5v).

4. After the detector is tested, buckle the detector on the bottom plate and tighten it clockwise.

5, an independent smoke alarm protection of the space is about a radius of 30 square meters (open), and smoke installed cant more than 45 degrees.

The integration of cutting-edge technology has also brought about features such as wireless connectivity. Some smoke alarms are equipped with wireless modules that enable them to communicate with other smart home devices or central monitoring systems. This connectivity allows for real-time notifications, enhancing the ability to respond swiftly to emerging fire hazards.

In essence, the working principle of a smoke alarm hinges on its ability to detect the earliest signs of a fire and promptly notify occupants. This swift detection and notification play a pivotal role in providing valuable seconds or minutes that can be critical in ensuring a safe evacuation and minimizing potential damages. As technology advances, the precision and reliability of smoke alarms continue to evolve, reinforcing their status as indispensable devices in fire safety and prevention.

product-1600-906