(1) The alarm probe is mainly a detection element in contact with the combustion gas sensor, composed of alumina and adhesive on the platinum wire coil, and its outer surface is attached to platinum, palladium and other rare metals. Therefore, be careful when installing to avoid breaking the probe.
(2) The installation height of the alarm should generally be 160-170cm, in order to facilitate the maintenance personnel for routine maintenance.
(3) alarm is a safety instrument, sound, light display function, should be installed in the staff easy to see and hear the place, in order to eliminate hidden dangers in a timely manner.
(4) The alarm can not be around the instrument work has an impact on the strong electromagnetic field (e.g. high-power motor, transformer).
(5) The density of the gas under test is different, the installation position of the indoor probe should also be different. When the gas density under test is less than the air density, the probe should be mounted 30cm away from the roof, with a downward direction, and vice versa, the probe should be mounted at 30cm above the ground and upward.
