Types Of Heat Detectors

Oct 04, 2019

Leave a message

Heat detectors are often divided into four types: pneumatic detectors (high-lying tubes), thermocouples or thermoelectric reactors, thermistors, and pyroelectric detectors.

1. Pneumatic detector (High-lytube)

Using the principle of increasing the volume of gas after the inflatable container receives thermal radiation, the change of the container wall is measured to determine the intensity of infrared radiation. This is a more old-fashioned detector, but in 1947 after the improvement of the pneumatic detector, using a photoelectric tube to measure the small changes in the wall of the container, so that the sensitivity greatly improved, so this pneumatic detector is also known as the Gaolai element.

2. Thermistor

The resistance value of the thermistor varies with its own temperature. Its temperature depends on the joule heat generated by absorbing radiation, adding current to the work, ambient temperature, and heat dissipation. Thermistors are basically made of semiconductor materials, with negative resistance temperature coefficient (NTC) and positive resistance temperature coefficient (PTC).

Thermistors are usually two-end devices, but they are also made into three ends and four ends. Both end devices or three-ended devices are directly heated, and four-ended devices are indirectly heated. Thermistors are usually made small and have beaded, ring-shaped and thin-shaped shapes. The thermistor-measured radiometer made of oxide semiconductors with negative temperature coefficients (generally a mixture of manganese, nickel and cobalt oxides) is often two components: one is the main element, the positive window receives infrared radiation; Only the temperature compensates.

3. Thermocouples and thermoelectric reactors

Thermocouples are one of the oldest thermal detectors and are still widely used. Thermocouples work based on the temperature differential effect. A single thermocouple provides a relatively small temperature difference electric potential, can not meet the requirements of some applications, so often several or dozens of thermocouples string together to form a thermopile. The thermoelectric reactor can provide a larger temperature difference electric potential than the thermocouple, and the new thermoelectric reactor is made of thin-film technology, so it is called a thin-film thermoelectric reactor.

4. Heat-eo-detector

The pyroelectric detector is a late-developed thermal detector. Today, not only are unit pyroelectric detectors mature, but multiple array elements have been successfully applied. The detection rate of pyroelectric detector is lower than that of photon detector, but its spectral response is wide, and it has been applied in infrared thermal imaging, infrared camera tube, non-contact temperature measurement, intrusion alarm, infrared spectrometer, laser measurement and submillimeter wave measurement, so it has become an important infrared detector.


Send Inquiry